How to choose engraving machine?
How to choose engraving machine?
First, a clear usage of the working, do not expect to fix all works by only one set of machine! The engraving machine manufacturers
into a varietyof models, is to deal with a variety of processing tasks. For example, you buy a mold class engraving machine to carve
color plates, or buy a large engraving machine to carve seals, which are causing huge waste, but it will not get good results.
Similarly you buy adclass mold engraving machine to do, you may simply not competent. So before you purchase, be sure to fully
explain their sales staff to do the work content, including the size of the workpiece, and materials. Second, choose a suitable model
for the first time to purchase a small advertising sign shop, mainly produced three dimensional characters light board, the word
crystal, color plates, badges and other purposes, should buy advertising class. In general, more than 1200mm format engraving
machine, suitable for engraving color plates and other fine living, but suitable for sawing words, do some major brand flat. Format in
1200mm and below are generalpurpose engraving machine, can be used as color plates and the like and deliberately, they saw the
word can be used for menial jobs. To be processed, or other shaped cylindrical workpiece, due to the need to install some fixtures
or rotary axis, which would be shown in column Z axis high tops to a large space between the head, so you can use a dedicated
machine. If the seal is engraved stamp shop dedicated, can be equipped with a small laser engraving machine. Third, understand
each machine engraving machine manufacturers its internal structure is basically similar, but out of the machine quality is different.
This time it requires you to have a pair of "Fire Eyes eye" look engraving machine material good or bad, the pros and cons of the
accessories available. But most customers do not understand this, even if the scene saw the machine can not be seen, which requires
the salesperson you want to learn more about the engraving machine spindle power, the use of electrical power, the drive is a drive
plate with homemade it is the quality and stability of the drive. Four, signed a contract after deciding to buy, the first thing to do is to sign
a contract with the seller, the contract should specify the purchase of models, configurations, prices, delivery times and delivery methods,
training methods, warranty, and payment and other factors. After signing the contract, generally should be required to pay a deposit
contract (except a spot). Fifth, after the arrival of the delivery and training engraving machine, generally carried out by technical personnel
on site inspection machine out of the box, after power, should be carefully examined whether the appearance of damage, whether in
transportation impact damage. As intact, and then contract with a random manual inventory control machine configuration with
random accessories. Machines installed by the technical staff (including hardware installation, removal fixtures, placement
machine. Feeder power cable with a variety of software to install, configure the computer, install the optional engraving software).
Installed by the factory to provide a test drawing engraving machine tests, such as the right to complete the carving test, test delivery
and acceptance is completed. Customer operator requires secondary education, and has experienced computer operating basis,
mainly in the training process should be familiar with for different quantity to select different engraving speeds and using different
tools in this area often requires the accumulation of experience, have a good grasp on the machine and extend tool life good.
Six, the problem may arise in use and service guarantee (a) use of the environment for hightech electro mechanical integration
engraving machine equipment, the work environment has certain requirements.
1. Avoid strong electric, magnetic and other serious impact engraving machine signal transmission equipment. Such as:
welding, towers and so on. 2. Use threecore power to ensure a good grounding engraving machine, reducing interference.
3. Steady voltage requirements, avoid large fluctuations, the best use regulator. 4. The machine can not work in the long acid,
alkali environment. (B) the maintenance and repair engraving machine used in the processing business, processing resulting
powder, dusty. Use should pay attention to maintaining clean and lubricate the screw, rod and other parts in a timely manner to
clean dust and transmission components refueling; operator should promptly cleaning, refueling, prohibited live plug. (C) the
use of engraving machine software has many aspects of engraving software available. Such as: Wentai carving, Casmate-pro, Caxa, Mastercam, Artcam, Smartcam, Type3, etc., in order to achieve your engraving requirements, please choose the correct
operating software. Rationality precision (four) processing problems 1. In addition to processing by the engraving machine to
ensure that, the rational process is also very important. In order to ensure the accuracy of machining, please note rationality
processing technology. 2. The tool to use because of the tool itself, and precision manufacturing processes affect machining
accuracy. Therefore, in the processing of select suitable machining tool. 3. Proficiency and responsibility of the operator to operator
also a tremendous impact on the machining accuracy. 4. The machine engraving machine wear worn during use is inevitable that
over time, the accuracy of the machine the machine will wear decreased Summary: Through the above detailed description,
I believe you can bring help .